Mini Car GPS Tracker Tk806 Remotely Cut Engine DC10-80V Motorcycle GSM Locator Realtime Acc Alert Free Tracking Alarm

• Customization: Available
• Screen Size: No Screen
• Use: Automotive
• Model NO.: TK806
• Sample: Acceptance
• Network: GSM/GPRS
• Working Temperature: -20 to +55
• Transport Package: 50PCS/Carton
• Specification: 77mm* 27mm * 15mm
• Trademark: EJQ
• Origin: Zhejiang

Product Description

Content	Specs.
Dim.	77mm* 27mm * 15mm (3.02" * 1.06" * 0.58")
Weight	36g
Network	2G GSM/GPRS
Band	850/900/1800/1900Mhz
GPS sensitivity	-159dBm
GPS accuracy	5m
GPS chipset	UBX-G7020
Battery	Chargeable 3.7V 150mAh Li-ion battery
Car input charger	DC 10V-80V
Storage Temp.	-40°C to +85°C
Operation Temp.	-20°C to +55°C
Humidity	5%--95% non-condensing

1. Wide Operating Voltage DC 10V-80V, covered most vehicles on the market
2. Remotely Cut Of Power: After you sent the SMS command, the device will stop your car engine, and it will remain the
immobile state until it received the next SMS command to resume the power and oil 
3. GPS+AGPS+LBS Three Positioning Ways: If the gps signal is good, the device will locate via gps satellite, if not, the
device will locate via LBS! Under GPS locating mode, the accuracy is 5-10 meters, under LBS locating mode, the accuracy
is 100-1000 meters
4. Realtime Tracking: You will can realtime track the device on google maps via mobilephone, tablet and computer, and the
minumum data upload interval is 10 seconds
5. History Route Playback: The APP and web server can record the upload data of the device up to 6 months, you will can
playback the history route at any time
6. Power Saving Mode: The device go into standby mode when there isn't vibration for 3 minutes , it will go into working
mode when it feel vibration.
7. ACC Alarm: After the orange line connected to the car ACC line, if you set the ACC alarm, then when the car ignition turns
on and starts, it will send ACC On to the admin number and SOS number by SMS
8. Overspeed Alarm: This alarm works only under continuous positioning mode.When the unit speed is exceed the speed you
presetted, it will send message "speed alarm!" to the admin number every 5 minutes. 
9. Shake Alarm: After you did the shake alarm setting,please keep the tracker being stationary for 5 minutes, then this function
will start working. It will send SMS "sensor alarm!" to the admin number when the unit get shocked. 
10. Movement Alarm: When the units stays immobile in a place for 10 minutes, the user can set up the movement alarm by this
command "move+passord", then in case the device moved 500m it will send alarm SMS "Move Alarm+Latitude and longitude"
to the authorized number. 
11. Geofence: Set up a geofence for the tracker to restrict its movements within a district. The unit will send alarm information
to APP and web server when it goes out of or get in this district. 
12. Sleep Mode: * Sleep by time mode: After did this setting, tracker will only work for 5 minutes after being waked up, and back
to sleep mode, GPS will shut off and GSM will works in low consumption mode. SMS, call will can wake up the tracker. * Sleep
by shock sensor mode: After did this setting, if no shock for 5 minutes, the tracker will work under "sleep by shock" mode, GPS
will shut off, GSM will works in low consumption. Vibration, SMS, call will can wake up the tracker.